Sony VPL-CS7 User Manual - Page 17

Projecting the Picture Connecting the Projector To connect a computer Ex. VPL-CS7 Left side When you connect the projector, make sure to: • Turn off all equipment before making any connections. • Use the proper cables for each connection. • Insert the cable plugs firmly; loose connections may increase noise and reduce performance of picture signals. When pulling out a cable, be sure to pull it out from the plug, not the cable itself AUDIO VIDEO S VIDEO INPUT A MONITOR OUT 2 1 Connecting with a Computer This section describes how to connect the projector to a computer. For more information, refer to the computer's instruction manual. to audio output Computer to monitor output 1HD D-sub 15-pin cable (supplied) 2Stereo audio connecting cable (not supplied) (Use a no-resistance cable) Notes • The projector accepts VGA, SVGA, XGA signals. However, we recommend that you set the output mode of your computer to SVGA mode for the external monitor. • If you set your computer, such as a notebook type, to output the signal to both your computer's display and the external monitor, the picture of the external monitor may not appear properly. Set your computer to output the signal to only the external monitor. For details, refer to the computer's operating instructions supplied with your computer. Connecting the Projector 17