Sony VPL-CS7 User Manual - Page 24
Security Lock, INSTALL SETTING menu, turn - lamp for
View all Sony VPL-CS7 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
Security Lock The projector is equipped with a security lock function. When you turn the power of the projector on, you are required to input the previously set password. If you do not input the correct password, you will not be able to project the picture. Note You will not be able to use the projector if you forget your password and the password administrator is not available. Be please aware that using the security lock can prevent valid usage in such cases. To use the security lock 1 Press the MENU key and then, in the INSTALL SETTING menu, turn on the "Security Lock" setting. 2 Enter the password. Use the MENU, v/V/b/B, and ENTER keys to enter the four-digit password. (The default setting is "ENTER, ENTER, ENTER, ENTER." Input "ENTER" four times when you use the projector for the first time.) Enter password key. Password required for power-on. Use: Cancel: Other key Next, the screen for entering a new password is displayed. (Enter the current password at this screen if you want to keep it.) Enter new password key. Power-on cannot be performed without the password. Use: Cancel: Other key 3 Enter the password again to confirm. Re-enter new password key. Be sure to remember this password. Use: Cancel: Other key The security lock is completed when the following message appears. INSTALL SETTING X Tilt... V Keystone: Auto... Image Flip: Off Background: Blue Lamp Mode: Standard High Altitude Mode:Off Security Lock: On Input A Security Lock enabled! If the menu screen displays an "Invalid Password!" message, do over again from step 1. INSTALL SETTING X Tilt... V Keystone: Auto... Image Flip: Off Background: Blue Lamp Mode: Standard High Altitude Mode:Off Security Lock: Off Input A Invalid Password! 4 Turn the main power off and disconnect the AC power cord. The security lock is set to on, then it becomes effective. The screen for entering the password is displayed when the power is turned on the next time. Security certification When the screen for entering the password is displayed, enter the password that was set. If you fail to enter the correct password after three tries, the projector cannot be used. In this case, press the I / 1 key to turn off the power. 24 Security Lock