Sony WH-1000XM4 Help Guide - Page 51
Wake the computer up if the computer is in standby sleep or hibernation mode., Turn on the headset
View all Sony WH-1000XM4 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
Help Guide Wireless Noise Canceling Stereo Headset WH-1000XM4 Connecting to a paired computer (Windows 10) Before starting the operation, make sure of the following: Depending on the computer you are using, the built-in Bluetooth adaptor may need to be turned on. If you do not know how to turn on the Bluetooth adaptor or are unsure if your computer has a built-in Bluetooth adaptor, refer to the operating instructions supplied with the computer. 1 Wake the computer up if the computer is in standby (sleep) or hibernation mode. 2 Turn on the headset. Press and hold the (power) button for about 2 seconds. You will hear the voice guidance say, "Power on". Check that the indicator (blue) continues to flash after you release your finger from the button. If the headset has automatically connected to the last connected device, you will hear the voice guidance say, "Bluetooth connected". Check the connection status on the computer. If it is not connected, proceed to step 3. 3 Select the headset using the computer. 1. Right-click the speaker icon on the toolbar, then select [Playback devices]. 2. Right-click [WH-1000XM4]. If [WH-1000XM4] is not displayed on the [Sound] screen, right-click on the [Sound] screen, then check [Show Disconnected Devices]. 51