Stihl FS 250 R Product Instruction Manual - Page 16
Risk of Kickout Blade Thrust, with All Rigid Cutting Blades, Using the Grass Cutting Blade, Using
View all Stihl FS 250 R manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
English / USA 002BA135 KN 000BA020 KN 002BA066 KN Risk of Kickout (Blade Thrust) with All Rigid Cutting Blades Using the Grass Cutting Blade The 8-tooth grass cutting blade is recommended for cutting fern or reed. Both types of grass cutting blade have to be resharpened when all cutting edges are dull. !Warning! Kickout (blade thrust) is the sudden and uncontrolled motion towards the operator's right or rear that can occur when the shaded area of a rotating blade comes in contact with a solid rigid object like a tree, rock, bush or wall. The rapid counterclockwise rotation of the blade may be stopped or slowed, and the cutting attachment may be thrown to the right or to the rear. This kickout (blade thrust) may cause loss of control of the power tool and may result in serious or fatal injury to the operator or bystanders. To reduce the risk of injury, extreme caution should be used when cutting with the shaded area of any rigid blade. All kinds of grass and weeds can be easily cut with the grass cutting blade. The power tool is swept in an arc similar to a scythe. !Warning! To reduce the risk of serious or fatal injury from blade breakage, never attempt to use this blade to cut woody materials. The 4-tooth grass cutting blade is intended to cut grass and weeds. It has 4 cutting knives with cutting edges on both sides, i.e. front and rear. When the cutting edges on one side become dull, the blade can be turned over to utilize the cutting edges on the other side. Using the Brush Knife When fitted to the power tool, the brush knife is suitable for applications ranging from cutting matted grass to clearing weeds, wild growth and scrub. To cut wild growth and scrub, lower the rotating brush knife down onto the growth to achieve a chopping effect - but keep the tool below waist height at all times. Exercise extreme caution when using this method of cutting. The higher the cutting attachment is off the ground, the greater the risk of loss of control and of cuttings being thrown sideways. FS 120, FS 120 R, FS 200, FS 200 R, FS 250, FS 250 R 15