Stihl FS 250 R Product Instruction Manual - Page 42
Engine Running Behavior, Lubricating the, Gearbox - fs 250 repair yourself
View all Stihl FS 250 R manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
002BA071 KN 233BA010 KN Engine Running Behavior Lubricating the Gearbox English / USA 2 1 If engine running behavior is unsatisfactory even though the air filter is clean and the carburetor and throttle cable are properly adjusted, the cause may be in the muffler. Have your STIHL dealer inspect the muffler for carbonization. STIHL recommends that maintenance and repair work be carried out only by authorized STIHL dealers. To reduce the risk of fire and burn injury, use only spark plugs authorized by STIHL. Always press spark plug boot (2) snugly onto terminal (1) of the proper size. (Note: If terminal has detachable SAE adapter nut, it must be attached.) A loose connection between spark plug boot and ignition wire connector in the boot may create arcing that could ignite combustible fumes and cause a fire. 1 2 : Check grease level regularly - about every 25 hours of operation. : Unscrew the filler plug (1). : If no grease can be seen on the inside of the filler plug, screw the tube (2) of STIHL gear lubricant for brushcutters - see "Special Accessories" - into the filler hole. : Squeeze up to 1/5 oz (5 g) grease into the gear housing. Do not completely fill the gear housing with grease. : Refit the filler plug and tighten it down firmly. FS 120, FS 120 R, FS 200, FS 200 R, FS 250, FS 250 R 41