Stihl FS 250 R Product Instruction Manual - Page 43
Replacing Starter Rope, and Rewind Spring
![]() |
View all Stihl FS 250 R manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
English / USA Replacing Starter Rope and Rewind Spring 1 1 1 1 32 4 256BA075 KN 5 6 32 4 256BA034 KN 256BA032 KN 256BA033 KN 256BA032 KN Replacing a Broken Starter Rope The rewind spring may pop out and uncoil during this operation. Take care to avoid injury. : Remove the screws (1). : Lift away the fan housing. : Remove the spring clip (2). : Carefully remove the rope rotor with washer (3) and pawl (4). : Ease the cap (5) out of the starter grip. : Remove remaining rope from the rotor and grip. : Tie a simple overhand knot in the new rope - see "Specifications" - and then thread it through the top of the grip and the rope bush (6). : Refit the cap in the grip. : Thread the rope through the rotor and secure it with a simple overhand knot. : Coat rope rotor bearing bore with non-resinous oil - see "Special Accessories". : Slip rotor over starter post - turn it back and forth to engage anchor loop of rewind spring. : Refit the pawl (4). : Fit the washer (3). : Install spring clip (2) on starter post and engage it on the pawl's peg - the spring clip must point clockwise. 42 FS 120, FS 120 R, FS 200, FS 200 R, FS 250, FS 250 R
![](/manual_guide/products/stihl-fs-250-product-instruction-manual-d24b1c9/43.png)