Stihl FS 250 R Product Instruction Manual - Page 24
Mounting the Loop Handle
View all Stihl FS 250 R manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
Mounting the Loop Handle English / USA 002BA098 KN 002BA099 KN 4 2 2 1 1 3 5 6 7 Swiveling the Handlebar Transport position: : Release the wing screw (3) and unscrew it until the handlebar (7) can be turned clockwise. : Turn the handlebar 90° and then swing the handles down. : Tighten down the wing screw firmly. Working position: : Reverse the sequence described above to swing the handles up and turn the handlebar counterclockwise. Loop Handle with Barrier Bar : Insert square nuts (1) in the barrier bar (2). : Line up the holes. : Place the clamp (3) in the loop handle (4) and position them both against the drive tube (5). : Fit the clamp (6) and place the barrier bar (2) in position. : Note correct position! : Line up the holes. : Insert screws (7) in holes and screw them into the barrier bar as far as stop. : Go to "Securing the loop handle". FS 120, FS 120 R, FS 200, FS 200 R, FS 250, FS 250 R 23