Stihl FS 250 R Product Instruction Manual - Page 45
Storing the Machine, Sharpening, Metal Cutting Tools
![]() |
View all Stihl FS 250 R manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
English / USA Storing the Machine Sharpening Metal Cutting Tools For periods of about 3 months or longer : Drain and clean the fuel tank in a well ventilated area. : Dispose fuel properly in accordance with local environmental requirements. : Run engine until carburetor is dry - this helps prevent carburetor diaphragms sticking together. : Remove, clean and inspect the cutting tool. : Thoroughly clean the machine - pay special attention to the cylinder fins and air filter. : Store the machine in a dry, high or locked location - out of the reach of children and other unauthorized persons. : Use a file (special accessory) to sharpen cutting tools. In case of more serious wear or nicks: Resharpen with a grinder or have work done by STIHL dealer. : Resharpen frequently, take away as little material as possible - two or three strokes of the file are usually enough. To avoid out-of-balance : After resharpening about 5 times, have blade checked on STIHL balancer (special accessory) and rebalanced as necessary. 1 2 1 1 2 2 : Resharpen the cutters (1) uniformly - do not alter the contour of the parent blade (2) in any way. See cutting tool packaging for additional sharpening instructions. 002BA042 KN 44 FS 120, FS 120 R, FS 200, FS 200 R, FS 250, FS 250 R
![](/manual_guide/products/stihl-fs-250-product-instruction-manual-d24b1c9/45.png)