Stihl MSA 200 C-BQ Instruction Manual - Page 28
Description of Operation
View all Stihl MSA 200 C-BQ manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
English - Keep handles dry, clean, and free from oil and grease. Greasy, oily handles are slippery causing loss of control. - Cut wood only. Do not use chain saw for purposes not intended. For example: do not use chain saw for cutting plastic, masonry or nonwood building materials. Use of the chain saw for operations different than intended could result in a hazardous situation. Causes and operator prevention of kickback Kickback may occur when the nose or tip of the guide bar touches an object, or when the wood closes in and pinches the saw chain in the cut. Tip contact in some cases may cause a sudden reverse reaction, kicking the guide bar up and back towards the operator. Pinching the saw chain along the top of the guide bar may push the guide bar rapidly back towards the operator. Either of these reactions may cause you to lose control of the saw which could result in serious personal injury. Do not rely exclusively upon the safety devices built into your saw. As a chain saw user, you should take several steps to keep your cutting jobs free from accident or injury. Kickback is the result of tool misuse and/or incorrect operating procedures or conditions and can be avoided by taking proper precautions as given below: - Maintain a firm grip, with thumbs and fingers encircling the chain saw handles, with both hands on the saw and position your body and arm to allow you to resist kickback forces. Kickback forces can be controlled by the operator, if proper precautions are taken. Do not let go of the chain saw. - Do not overreach and do not cut above shoulder height. This helps prevent unintended tip contact and enables better control of the chain saw in unexpected situations. - Only use replacement bars and chains specified by the manufacturer. Incorrect replacement bars and chains may cause chain breakage and/or kickback. - Follow the manufacturer's sharpening and maintenance instructions for the saw chain. Decreasing the depth gauge height can lead to increased kickback. Description of Operation The power tool is operated with a rechargeable battery. Use only STIHL chargers to recharge the battery. Data exchange The power tool, battery and charger communicate with each other. The charger charges the battery and the battery supplies the necessary power only if the data exchange functions properly. For this reason you should operate your power tool only with the approved STIHL batteries and STIHL chargers. 26 MSA 160 C, MSA 200 C