Stihl MSA 200 C-BQ Instruction Manual - Page 33
Base of filler cap is rotated
![]() |
View all Stihl MSA 200 C-BQ manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
English 001BA241 KN 001BA233 KN 001BA237 KN 001BA238 KN N Remove the filler cap. Filling Chain Oil Tank Take care not to spill chain oil during refilling and do not overfill the tank - leave approx. 1/2" (13 mm) air space. Closing N Push the filler cap down and twist it clockwise until it engages. Filler cap is now closed. If the filler cap will not engage into the tank housing 001BA231 KN The base of the filler cap is rotated in relation to the upper part. N Look at the black alignment marks on the top of the filler cap. Then the marking on filler cap and the "closed" marking on housing will align. 1 001BA234 KN 001BA235 KN Handle is in an upright position: N Position filler cap - markings on filler cap and housing must align. N Push the filler cap down as far as it will go. N Flip the handle down. Left: Right: Base of filler cap is rotated to the closed position - interior marking (1) is aligned with the exterior marking. Base of filler cap is in the correct position for installation - interior marking is below the clip. It does not align with the exterior marking. MSA 160 C, MSA 200 C 31
![](/manual_guide/products/stihl-msa-200-cbq-instruction-manual-4a91410/33.png)