Stihl MSA 200 C-BQ Instruction Manual - Page 37
Light Emitting Diodes LED, on Battery
View all Stihl MSA 200 C-BQ manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
Light Emitting Diodes (LED) on Battery Four light emitting diodes show the battery's state of charge and any problems that occur with the battery or power tool. During Charging Process The light emitting diodes glow continuously or flash to indicate the progress of charge. A green flashing light emitting diode indicates the capacity that is currently being charged. During Operation English The green light emitting diodes glow continuously or flash to indicate the state of charge. 80 - 100 % 0 - 20 % 60 - 80 % 3901BA010 KN 3901BA018 KN 3901BA016 KN 1 N Press button (1) to activate the display - the display goes off automatically after 5 seconds. The light emitting diodes can glow or flash green or red. Light emitting diode glows continuously green. Light emitting diode flashes green. Light emitting diode glows continuously red. Light emitting diode flashes red. 20 - 40 % 40 - 60 % 60 - 80 % 80 - 100 % The light emitting diodes on the battery turn off automatically when the charge process is completed. If the light emitting diodes on the battery flash or glow red - see "If the red light emitting diodes glow continuously / flash". 40 - 60 % 20 - 40 % 0 - 20 % If the light emitting diodes on the battery flash or glow red - see "If the red light emitting diodes glow continuously / flash". MSA 160 C, MSA 200 C 35