Stihl MSA 200 C-BQ Instruction Manual - Page 54

Troubleshooting

Get Stihl MSA 200 C-BQ PDF manuals and user guides View all Stihl MSA 200 C-BQ manuals
Add to My Manuals
Save this manual to your list of manuals

Page 54 highlights

English Troubleshooting Always remove the battery from the machine before starting any work on the machine. Problem Cause Remedy No electrical contact between machine Remove battery, visually inspect the and battery contacts and reinsert the battery State of charge of the battery is too low Charge battery Machine does not start when switched on (1 LED on battery flashes green) Battery too hot / too cold (1 LED on battery is red) Malfunction of battery (4 LEDs on battery flash red) Unit too hot Let the battery cool down / let the battery warm up gradually at temperatures of approx. 15 °C - 20 °C (59 °F - 68 °F) Remove the battery from the machine and reinsert it. Turn on the machine - if the LEDs still flash, the battery is faulty and must be replaced Let the machine cool off Machine switches off in operation (3 LEDs on battery are red) Electromagnetic fault or malfunction in machine (3 LEDs on battery flash red) Remove the battery from the machine. Remove dirt from contacts in the battery compartment with a blunt object. Rein- sert the battery. Turn on machine - if the LEDs still flash, the machine is faulty and must be checked by a servicing dealer 1) Moisture in the machine and/or battery Let the machine/battery dry Battery or machine electronics too hot Remove battery from the machine, let battery and machine cool off Electrical or electromagnetic malfunction Remove battery and reinsert it 52 MSA 160 C, MSA 200 C

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
MSA 160 C, MSA 200 C
English
52
Troubleshooting
Always remove the battery from the machine before starting any work on the machine.
Problem
Cause
Remedy
Machine does not start when switched on
No electrical contact between machine
and battery
Remove battery, visually inspect the
contacts and reinsert the battery
State of charge of the battery is too low
(1 LED on battery flashes green)
Charge battery
Battery too hot / too cold
(1 LED on battery is red)
Let the battery cool down / let the battery
warm up gradually at temperatures of
approx. 15 °C - 20 °C (59 °F - 68 °F)
Malfunction of battery
(4 LEDs on battery flash red)
Remove the battery from the machine
and reinsert it. Turn on the machine – if
the LEDs still flash, the battery is faulty
and must be replaced
Unit too hot
(3 LEDs on battery are red)
Let the machine cool off
Electromagnetic fault or malfunction in
machine
(3 LEDs on battery flash red)
Remove the battery from the machine.
Remove dirt from contacts in the battery
compartment with a blunt object. Rein
-
sert the battery. Turn on machine – if the
LEDs still flash, the machine is faulty and
must be checked by a servicing dealer
1)
Moisture in the machine and/or battery
Let the machine/battery dry
Machine switches off in operation
Battery or machine electronics too hot
Remove battery from the machine, let
battery and machine cool off
Electrical or electromagnetic malfunction
Remove battery and reinsert it