Stihl MSA 200 C-BQ Instruction Manual - Page 39
Switching
View all Stihl MSA 200 C-BQ manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
Red flashing light ... ... indicates the following: - No electrical contact between battery and charger - remove and refit the battery - Malfunction in battery - see also "Light Emitting Diodes (LEDs) on Battery". - Malfunction in charger - have it checked by a servicing dealer. STIHL recommends a STIHL servicing dealer. Switching On When delivered, the battery is not fully charged. It is advisable to charge the battery completely before using it for the first time. N Before inserting the battery, remove the battery compartment cover if there is one; to do this, press both safety catches at the same time - cover is unlocked - and remove the cover Inserting the battery English N Hold the machine with both hands - wrap hands tightly around the handles N Make certain that the saw chain has not yet been positioned for cutting and is not touching any other objects N Pull hand guard towards the front handle until it engages audibly and the hand guard is in the position , - chain brake is released 3999BA010 KN 3999BA015 KN 3999BA016 KN MSA 160 C, MSA 200 C 1 N Insert battery in the battery compartment of the machine - press gently until it clicks into place - top of battery must be flush with the top edge of the housing Switching on the machine N Remove the chain scabbard N Assume a firm and secure stance N Ensure that there are no other persons within the swivel range of the machine 2 N Press trigger switch lockout (1) with thumb N Depress trigger switch (2) with index finger N Guide the machine into the wood with the saw chain running The motor will not run unless the hand guard is set to , and the trigger switch lockout (1) and trigger switch (2) are pressed at the same time. 37