Stihl MSA 200 C-BQ Instruction Manual - Page 34

Checking Chain Lubrication, Coasting Brake

Get Stihl MSA 200 C-BQ PDF manuals and user guides View all Stihl MSA 200 C-BQ manuals
Add to My Manuals
Save this manual to your list of manuals

Page 34 highlights

English Checking Chain Lubrication Coasting Brake 001BA239 KN 143BA024 KN 3999BA014 KN N If your cap i in the closed position: with the filler cap in the filling neck, twist it counterclockwise until it drops into its seat. N Continue to twist the filler cap counterclockwise (approx. 1/4 turn) - this will twist the base of the cap into the correct position for installation. N While pushing down on the cap, twist the filler cap clockwise and close it - see section "Closing." The saw chain must always throw off a small amount of oil. NOTICE Never operate your saw without chain lubrication. If the chain runs dry, the whole cutting attachment will be irretrievably damaged within a very short time. Always check chain lubrication and the oil level in the tank before starting work. Every new chain has to be broken in for about 2 to 3 minutes. After breaking in the chain, check chain tension and adjust if necessary - see "Checking Chain Tension". 1 2 The coasting brake stops the rotating saw chain when the trigger switch is released. 1 Coasting brake inactive 2 Coasting brake active 32 MSA 160 C, MSA 200 C

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
MSA 160 C, MSA 200 C
English
32
N
If your cap i in the closed position:
with the filler cap in the filling neck,
twist it counterclockwise until it
drops into its seat.
N
Continue to twist the filler cap
counterclockwise (approx. 1/4 turn)
– this will twist the base of the cap
into the correct position for
installation.
N
While pushing down on the cap,
twist the filler cap clockwise and
close it – see section "Closing."
The saw chain must always throw off a
small amount of oil.
NOTICE
Never operate your saw without chain
lubrication. If the chain runs dry, the
whole cutting attachment will be
irretrievably damaged within a very short
time. Always check chain lubrication and
the oil level in the tank before starting
work.
Every new chain has to be broken in for
about 2 to 3 minutes.
After breaking in the chain, check chain
tension and adjust if necessary – see
"Checking Chain Tension".
The coasting brake stops the rotating
saw chain when the trigger switch is
released.
1
Coasting brake inactive
2
Coasting brake active
001BA239 KN
Checking Chain Lubrication
143BA024 KN
Coasting Brake
2
1
3999BA014 KN