TASCAM DA-6400 IF-DA64 Owners Manual - Page 10
Synchronizing with clock from a source other than the Dante network, Example using a clock generator
![]() |
View all TASCAM DA-6400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
Synchronizing with clock from a source other than the Dante network 88Example using a clock generator Clock Generator IF-DA64 / DA-6400 Dante Clock Slave IF-DA64 / DA-6400 Dante Clock Slave Dante Network Mixer Dante Clock Master (Preferred Master & Enable Sync to External) • When synchronizing to an external word clock generator, connect that generator to the device that is the clock master in the Dante network. • If a device synchronizes to its internal clock, an external word clock or another clock that is not on the Dante network, always set check marks for the "Enable Sync to External" and "Preferred Master" items on the Clock Status page of the Dante Controller Network View screen. • Set Dante Clock Slave devices in the following manner. • Set the device to synchronize with the Dante network. • Do not synchronize to an external clock generator or the device's own internal clock. • In Dante Controller remove the check marks for the "Enable Sync to External" and "Preferred Master" settings. CAUTION The only device that can synchronize to the external word clock generator is the one that is the Dante Clock Master in the Dante network. 10 TASCAM IF-DA64
![](/manual_guide/products/tascam-da6400-ifda64-owners-manual-fae0839/10.png)