TASCAM DA-6400 IF-DA64 Owners Manual - Page 11
Using Dante Controller, Dante Controller overview, Audio routing settings
![]() |
View all TASCAM DA-6400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
Using Dante Controller Dante Controller overview This card uses the Dante Controller application, which is available at the Audinate website, to connect with other devices that support Dante. Download the latest version of the Dante Controller application and an operation manual from the Audinate website. Audinate download page https://www.audinate.com/products/software/dante-controller Audio routing settings When Dante Controller is launched, the Network View screen shown below will open. On this screen, you can set and monitor conditions related to the Dante network. Make at least the following settings using a computer that has Dante Controller installed. • Set the audio routing. • Adjust the sampling frequency and bit depth of each Dante device. NOTE Settings made using Dante Controller are stored in the built-in memory of each Dante device. Unless settings are modified, connections will not change even if Dante Controller is quit or the computer is disconnected from the Dante network. 1 Receiving device name This is the name of a receiving device on the Dante network. 11 TASCAM IF-DA64
![](/manual_guide/products/tascam-da6400-ifda64-owners-manual-fae0839/11.png)