TP-Link AC750 Archer C20i V1 User Guide - Page 71
Enable WMM - WMM
View all TP-Link AC750 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 71 highlights
Archer C20i AC750 Wireless Dual Band Router performance because of excessive packets. 2346 is the default setting and is recommended. DTIM Interval - This value determines the interval of the Delivery Traffic Indication Message (DTIM). A DTIM field is a countdown field informing clients of the next window for listening to broadcast and multicast messages. When the router has buffered broadcast or multicast messages for associated clients, it sends the next DTIM with a DTIM Interval value. You can specify the value between 1-15 Beacon Intervals. The default value is 1, which indicates the DTIM Interval is the same as Beacon Interval. Enable Short GI - This function is recommended for it will increase the data capacity by reducing the guard interval time. Enable Client Isolation - This function can isolate wireless stations on your network from each other. Wireless devices will be able to communicate with the router but not with each other. To use this function, check this box. AP Isolation is disabled by default. Enable WMM - WMM function can guarantee the packets with high-priority messages being transmitted preferentially. It is strongly recommended. Note: If you are not familiar with the setting items in this page, it's strongly recommended to keep the provided default values; otherwise it may result in lower wireless network performance. 4.7.6 Wireless Statistics Choose menu "Wireless → Wireless Statistics", you can see the MAC Address, Current Status, Received Packets and Sent Packets for each connected wireless station. Figure 4-42 Wireless Statistics MAC Address - The connected wireless station's MAC address. Current Status - The connected wireless station's running status, Received Packets - Packets received by the station. Sent Packets - Packets sent by the station. You cannot change any of the values on this page. To update this page and to show the current connected wireless stations, click on the Refresh button. - 60 -