TP-Link TD-VG5612 TD-VG5612 V1 User Guide - Page 64
DHCP Server, 4.7.1 DHCP Settings
View all TP-Link TD-VG5612 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
TD-VG5612 300Mbps Wireless N VoIP VDSL/ADSL Modem Router User Guide DSL Modulation Type: The modem router supports two modulation types: ADSL and VDSL, you can select the corresponding types according to your needs. If you choose "ADSL", you will see the screen as shown in the following figure: • VPI (0-255): Identifies the virtual path between endpoints in an ATM network. The valid range is from 0 to 255. Please input the value provided by your ISP. • VCI (1-65535): Identifies the virtual channel endpoints in an ATM network. The valid range is from 1 to 65535 (1 to 31 is reserved for well-known protocols). Please input the value provided by your ISP. If you choose "VDSL", you will see the screen as shown in the following figure: • VLAN: Check the box to enable the Virtual LAN ID. • VLAN ID (1-4049): This indicates the VLAN group, and the valid range is from 1 to 4049. Click the Save button to save your settings. 4.7 DHCP Server Choose "DHCP Server", you can see the next submenus: Click any of them, and you will be able to configure the corresponding function. 4.7.1 DHCP Settings Choose menu "DHCP Server""DHCP Settings", you can configure the DHCP Server on the page as shown in Figure 4-37.The modem router is set up by default as a DHCP (Dynamic Host Configuration Protocol) server, which provides the TCP/IP configuration for all the PC(s) that are connected to the modem router on the LAN. 53