TP-Link TL-R4299G User Guide - Page 19

Quick Setup, Network

Get TP-Link TL-R4299G PDF manuals and user guides
UPC - 845973040260
View all TP-Link TL-R4299G manuals
Add to My Manuals
Save this manual to your list of manuals

Page 19 highlights

TL-R4299G Dual-WAN SMB Broadband Router User Guide 4.2 Quick Setup Please refer to chapter 3"Quick Installation Guide". 4.3 Network Choose menu "Network", the next submenus are shown below: Figure 4-2 Click any of them, and you will be able to configure the corresponding function. The detailed explanations for each submenu are provided below. 4.3.1 LAN Choose menu "Network→LAN", you can configure the IP parameters of the LAN on the screen below. Figure 4-3 ¾ MAC Address - This field displays the physical address of the LAN. The value can't be changed. ¾ IP Address - Enter the IP address for the LAN of the Router, the formal is in dotted-decimal notation (the factory default value is 192.168.1.1). ¾ Subnet Mask - Enter the subnet mask for the LAN of the Router, this address code determines the size of the network. Normally use 255.255.255.0 as the subnet mask. ) Note: 1) If you change the IP address of the LAN, you must use the new IP address to login to the router. 2) If the new LAN IP Address you set is not in the same subnet, the IP Address pool in the 13

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
TL-R4299G
Dual-WAN SMB Broadband Router User Guide
13
4.2
Quick Setup
Please refer to
chapter 3"Quick Installation Guide"
.
4.3
Network
Choose menu “
Network
”, the next submenus are shown below:
Figure 4-2
Click any of them, and you will be able to configure the corresponding function. The detailed
explanations for each submenu are provided below.
4.3.1
LAN
Choose menu “
Network
→
LAN
”, you can configure the IP parameters of the LAN on the screen
below.
Figure 4-3
¾
MAC Address
-
This field displays the physical address of the LAN. The value can't be
changed.
¾
IP Address -
Enter the IP address for the LAN of the Router, the formal is in dotted-decimal
notation (the factory default value is 192.168.1.1).
¾
Subnet Mask
-
Enter the subnet mask for the LAN of the Router, this address code
determines the size of the network. Normally use 255.255.255.0 as the subnet mask.
)
Note:
1)
If you change the IP address of the LAN, you must use the new IP address to login to the
router.
2)
If the new LAN IP Address you set is not in the same subnet, the IP Address pool in the