TP-Link TL-R4299G User Guide - Page 8
Hardware installation - user guide
UPC - 845973040260
View all TP-Link TL-R4299G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
TL-R4299G Dual-WAN SMB Broadband Router User Guide ¾ Supports UPnP, Dynamic DNS, Static Routing, VPN pass-through ¾ Supports Traffic Statistics ¾ Supports ICMP-FLOOD, UDP-FLOOD, TCP-SYN-FLOOD filter ¾ Ignores Ping packets from WAN or LAN ports ¾ Supports firmware upgrade ¾ Supports Remote and Web management 1.3 Conventions Parameters provided in the pictures are just references for setting up the product, which may differ from the actual situation. You can set the parameters according to your demand. Chapter 2. Hardware installation 2.1 Panel Layout 2.1.1 The Front Panel The Router's LEDs are located on the front panel (View from left to right). LED Descriptions: Name Status Power Not lit Lit up Not lit M1 Lit up Not lit M2 Lit up Flashing WAN/LAN (Link/Act) Not lit Lit up Flashing Not lit 100M(WAN) Lit up Not lit 1000M(LAN) Lit up Figure 2-1 Indication The router is power off The router is power on The router works properly M1 and M2 are flashing The router has a hardware error synchronously, the router is The router has a hardware error restoring the factory default The router has a hardware error settings. The router works properly There is no device linked to the corresponding port There is a device linked to the corresponding port but no activity There is an active device linked to the corresponding port The linked device is running at 10Mbps The linked device is running at 100Mbps The linked device is running at 10Mbps or 100Mbps The linked device is running at 1000Mbps 2