TP-Link TL-SG3109 User Guide - Page 145
permit (Management), permit, ethernet, port-channel, permit ip-source
UPC - 845973020484
View all TP-Link TL-SG3109 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 145 highlights
TL-SG3109/TL-SL3428/TL-SL3452 Gigabit Managed Switch Family CLI Reference Guide permit (Management) The permit Management Access-List Configuration mode command defines a permit rule. Syntax permit [ethernet interface-number | vlan vlan-id | port-channel port-channel-number] permit ip-source ip-address [mask mask | prefix-length] [ethernet interface-number | vlan vlan-id | port-channel port-channel-number] Parameters • interface-number - A valid Ethernet port number. • vlan-id - A valid VLAN number. • port-channel-number - A valid port channel index. • ip-address - A valid source IP address. • mask - A valid network mask of the source IP address. • prefix-length - Number of bits that comprise the source IP address prefix. The prefix length must be pre- ceded by a forward slash (/). (Range: 0 - 32) Default Configuration If no permit rule is defined, the default is set to deny. Command Mode Management Access-list Configuration mode User Guidelines Rules with Ethernet, VLAN and port-channel parameters are valid only if an IP address is defined on the appropriate interface. The system supports up to 128 management access rules. Example The following example permits all ports in the mlist access list. Console(config)# management access-list mlist Console(config-macl)# permit Page 144