TP-Link TL-SG3109 User Guide - Page 59
sntp client enable (Interface), sntp client enable, sntp broadcast client enable - updates
UPC - 845973020484
View all TP-Link TL-SG3109 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
TL-SG3109/TL-SL3428/TL-SL3452 Gigabit Managed Switch Family CLI Reference Guide sntp client enable (Interface) The sntp client enable Interface Configuration (Ethernet, port-channel, VLAN) mode command enables the Simple Network Time Protocol (SNTP) client on an interface. This applies to both receive broadcast and anycast updates. To disable the SNTP client, use the no form of this command. Syntax sntp client enable no sntp client enable Default Configuration The SNTP client is disabled on an interface. Command Mode Interface configuration (Ethernet, port-channel, VLAN) mode User Guidelines Use the sntp broadcast client enable Global Configuration mode command to enable broadcast clients globally. Use the sntp anycast client enable Global Configuration mode command to enable anycast clients globally. Examples The following example enables the SNTP client on Ethernet port 3. Console(config)# interface ethernet e3 Console(config-if)# sntp client enable Page 58