TP-Link TL-SG3109 User Guide - Page 333
dot1x multiple-hosts, Interface Configuration Ethernet mode
UPC - 845973020484
View all TP-Link TL-SG3109 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 333 highlights
TL-SG3109/TL-SL3428/TL-SL3452 Gigabit Managed Switch Family CLI Reference Guide dot1x multiple-hosts The dot1x multiple-hosts Interface Configuration mode command enables multiple hosts (clients) on an 802.1Xauthorized port, where the authorization state of the port is set to auto. To return to the default configuration, use the no form of this command. Syntax dot1x multiple-hosts no dot1x multiple-hosts Default Configuration Multiple hosts are disabled. Command Mode Interface Configuration (Ethernet) mode User Guidelines This command enables the attachment of multiple clients to a single 802.1X-enabled port. In this mode, only one of the attached hosts must be successfully authorized for all hosts to be granted network access. If the port becomes unauthorized, all attached clients are denied access to the network. For unauthenticated VLANs, multiple hosts are always enabled. Multiple-hosts must be enabled to enable port security on the port. Examples The following command enables multiple hosts (clients) on an 802.1X-authorized port. Console(config-if)# dot1x multiple-hosts Page 332