TP-Link TL-SG3109 User Guide - Page 156
channel-group
UPC - 845973020484
View all TP-Link TL-SG3109 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 156 highlights
TL-SG3109/TL-SL3428/TL-SL3452 Gigabit Managed Switch Family CLI Reference Guide channel-group The channel-group Interface Configuration (Ethernet) mode command associates a port with a port-channel. To remove a port from a port-channel, use the no form of this command. Syntax channel-group port-channel-number mode {on | auto} no channel-group Parameters • port-channel_number - Specifies the number of the valid port-channel for the current port to join. • on - Forces the port to join a channel without an LACP operation. • auto - Allows the port to join a channel as a result of an LACP operation. Default Configuration The port is not assigned to a port-channel. Command Mode Interface Configuration (Ethernet) mode User Guidelines There are no user guidelines for this command. Example The following example forces port 1 to join port-channel 1 without an LACP operation. Console(config)# interface ethernet e1 Console(config-if)# channel-group 1 mode on Page 155