TP-Link TL-SG3109 User Guide - Page 320
dot1x timeout quiet-period
UPC - 845973020484
View all TP-Link TL-SG3109 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 320 highlights
TL-SG3109/TL-SL3428/TL-SL3452 Gigabit Managed Switch Family CLI Reference Guide dot1x timeout quiet-period The dot1x timeout quiet-period Interface Configuration mode command sets the number of seconds that the device remains in the quiet state following a failed authentication exchange (for example, the client provided an invalid password). To return to the default configuration, use the no form of this command. Syntax dot1x timeout quiet-period seconds no dot1x timeout quiet-period Parameters • seconds - Specifies the time in seconds that the device remains in the quiet state following a failed authenti- cation exchange with the client. (Range: 0 - 65535 seconds) Default Configuration Quiet period is 60 seconds. Command Mode Interface Configuration (Ethernet) mode User Guidelines During the quiet period, the device does not accept or initiate authentication requests. The default value of this command should only be changed to adjust for unusual circumstances, such as unreliable links or specific behavioral problems with certain clients and authentication servers. To provide a faster response time to the user, a smaller number than the default value should be entered. Examples The following example sets the number of seconds that the device remains in the quiet state following a failed authentication exchange to 3600. Console(config)# interface ethernet e6 Console(config-if)# dot1x timeout quiet-period 3600 Page 319