TP-Link TL-SG3109 User Guide - Page 200
snmp-server group, v1 | v2 | v3 {noauth | auth | priv} [notify, write, noauth
UPC - 845973020484
View all TP-Link TL-SG3109 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 200 highlights
TL-SG3109/TL-SL3428/TL-SL3452 Gigabit Managed Switch Family CLI Reference Guide snmp-server group The snmp-server group Global Configuration mode command configures a new Simple Management Protocol (SNMP) group or a table that maps SNMP users to SNMP views. To remove a specified SNMP group, use the no form of this command. Syntax snmp-server group groupname {v1 | v2 | v3 {noauth | auth | priv} [notify notifyview ] } [read readview] [write writeview] no snmp-server group groupname {v1 | v2 | v3 [noauth | auth | priv]} Parameters • groupname - Specifies the name of the group. • v1 - Indicates the SNMP Version 1 security model. • v2 - Indicates the SNMP Version 2 security model. • v3 - Indicates the SNMP Version 3 security model. • noauth - Indicates no authentication of a packet. Applicable only to the SNMP Version 3 security model. • auth - Indicates authentication of a packet without encrypting it. Applicable only to the SNMP Version 3 security model. • priv - Indicates authentication of a packet with encryption. Applicable only to the SNMP Version 3 security model. • name - Specifies the context of a packet. The following contexts is supported: Router. If the context name is unspecified, all contexts are defined. • readview - Specifies a string that is the name of the view that enables only viewing the contents of the agent. If unspecified, all objects except for the community-table and SNMPv3 user and access tables are available. • writeview - Specifies a string that is the name of the view that enables entering data and configuring the contents of the agent. If unspecified, nothing is defined for the write view. • notifyview - Specifies a string that is the name of the view that enables specifying an inform or a trap. If unspecified, nothing is defined for the notify view. Applicable only to the SNMP Version 3 security model. Default Configuration No group entry exists. Command Mode Global Configuration mode User Guidelines There are no user guidelines for this command. Examples The following example attaches a group called user-group to SNMPv3 and assigns to the group the privacy security level and read access rights to a view called user-view. Console(config)# snmp-server group user-group v3 priv read user-view Page 199