TP-Link TL-SG3210 TL-SG3210 V1 CLI Reference Guide - Page 167
igmp-snooping multi-vlan-config
View all TP-Link TL-SG3210 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 167 highlights
receive IGMP report message from the member port, it will consider this port is not a member port any more. Member Port Time ranges from 60 to 600 in seconds. By default, it is 260. leave-time -- Leave Time, which is the interval between the switch reveiving a leave message from a host and the switch removing the host from the multicast groups. Leave Time ranges from 1 to 30 in seconds. By default, it is 1. router-port -- Static Router Port, which is mainly used in the network with stable topology. It ranges from 1 to 10. Command Mode Global Configuration Mode Example Modify Router Port Time as 300 seconds, Member Port Time as 200 seconds, and Leave time as 15 seconds for VLAN 1: TP-LINK(config)# igmp-snooping vlan-config 1 rtime 300 mtime 200 ltime 15 igmp-snooping multi-vlan-config Description The igmp-snooping multi-vlan-config command is used to create Multicast VLAN. To delete the corresponding Multicast VLAN, please use no igmp-snooping multi-vlan-config command. Syntax igmp-snooping multi-vlan-config { disable | enable } {vid} [rtime router-time] [mtime member-time] [ltime leave-time] [rport router-port] no igmp-snooping multi-vlan-config Parameter disable | enable -- Enable/ Disable Multicast VLAN. vid -- The ID of the VLAN desired to modify configuration, ranging from 2 to 4094. router-time -- Router Port Time. Within this time, if the switch does not receive IGMP query message from the router port, it will consider this port is not a router port any more. Router Port Time ranges from 60 to 600 in seconds. By default, it is 300. member-time -- Member Port Time. Within this time, if the switch does not receive IGMP report message from the member port, it will consider this port is not a member port any more. Member Port Time ranges from 60 to 600 in 155