TP-Link TL-SG3210 TL-SG3210 V1 CLI Reference Guide - Page 50
LACP Commands, lacp system-priority, lacp admin-key
View all TP-Link TL-SG3210 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
Chapter 9 LACP Commands LACP (Link Aggregation Control Protocol) is defined in IEEE802.3ad and enables the dynamic link aggregation and disaggregation by exchanging LACP packets with its partner. The switch can dynamically group similarly configured ports into a single logical link, which will highly extend the bandwidth and flexibly balance the load. lacp system-priority Description The lacp system-priority command is used to set global lacp system priority.. Syntax Lacp system-priority value Command Mode Global Configuration Mode Parameter value -- system-priority, ranging from 0 to 65535. By default, the value is 32768. Example Set global lacp system priority 1024: TP-LINK(config)# lacp system-priority 1024 lacp admin-key Description The lacp admin-key command is used to configure the admin key. To restore to the default value, please use no lacp admin-key command. Syntax lacp admin-key value no lacp admin-key Parameter value -- admin key, ranging from 0 to 65535. By default, the value is 1. 38