TP-Link TL-SG3210 TL-SG3210 V1 CLI Reference Guide - Page 82
dot1x guest-vlan, dot1x port-control, Interface Configuration Mode
View all TP-Link TL-SG3210 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 82 highlights
Command Mode Interface Configuration Mode(interface ethernet / interface range ethernet) Example Enable the IEEE 802.1X function for the port 1: TP-LINK(config)# interface ethernet 1 TP-LINK(config-if)# dot1x dot1x guest-vlan Description The dot1x guest-vlan command is used to enable the Guest VLAN function for a specified port. To disable the Guest VLAN function for a specified port, please use no dot1x guest-vlan command. Please ensure that the Control Type of the corresponding port is port-based before enabling the Guest VLAN function for it. Please refer to dot1x port-method for details. Syntax dot1x guest-vlan no dot1x guest-vlan Command Mode Interface Configuration Mode(interface ethernet / interface range ethernet) Example Enable the Guest VLAN function for port 2: TP-LINK(config)# interface ethernet 2 TP-LINK(config-if)# dot1x guest-vlan dot1x port-control Description The dot1x port-control command is used to configure the Control Mode of IEEE 802.1X for the specified port. To restore to the default configuration, please use no dot1x port-control command. Syntax dot1x port-control { auto | authorized-force | unauthorized-force } 70