TP-Link TL-SG3210 TL-SG3210 V1 CLI Reference Guide - Page 84
radius authentication primary-ip, radius authentication secondary-ip
View all TP-Link TL-SG3210 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 84 highlights
Command Mode Interface Configuration Mode(interface ethernet / interface range ethernet) Example Configure the Control Type for port 5 as port-based: TP-LINK(config)# interface ethernet 5 TP-LINK(config-if)# dot1x port-method port-based radius authentication primary-ip Description The radius authentication primary-ip command is used to configure the IP addressof the authentication server. Authentication server provides the authentication service for the switch via the stored client information, such as the user name, password, etc, with the purpose to control the authentication and accounting status of the clients. The RADIUS(Remote Authentication Dial-In User Service)server is used as the Authentication server generally. Syntax radius authentication primary-ip ip-addr Parameter ip-addr -- The IP address of the authentication server. Command Mode Global Configuration Mode Example Configure the IP of the authentication server as 10.20.1.100: TP-LINK(config)# radius authentication primary-ip 10.20.1.100 radius authentication secondary-ip Description The radius authentication secondary-ip command is used to configure the IP address of the alternate authentication server. To restore to the default configuration, please use no radius authentication secondary-ip command. Syntax 72