TP-Link TL-SG3210 TL-SG3210 V1 CLI Reference Guide - Page 92
Log Commands, logging local buffer
View all TP-Link TL-SG3210 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 92 highlights
Chapter 15 Log Commands The log information will record the settings and operation of the switch respectively for you to monitor operation status and diagnose malfunction. logging local buffer Description The logging local buffer command is used to configure the severity level and the status of theconfiguration input to the log buffer. To restore to the default configuration, please use no logging local buffer command. Local Log is the log information saved in the switch. It has two output channels, that is, it can be saved to two different positions, log buffer and log file. Indicates the RAM for saving system log and the inforamtion in the log buffer can be got by show logging buffer command. It will be lost when the switch is restarted. Syntax logging local buffer {level} [ disable | enable ] no logging local buffer Parameter level --Severity level of the log information output to each channel. There are 8 severity levels marked with values 0-7. The smaller value has the higher priority. Only the log with the same or smaller severity level value will be output. By default, it is 7 indicating that all the log information will be saved in the log buffer. disable | enable -- Disable or enable the log buffer. By default, it is enabled. Command Mode Global Configuration Mode Example Enable the log buffer function and set the severity as 6: TP-LINK(config)# logging local buffer 6 enable logging local flash Description 80