TP-Link TL-SG3210 TL-SG3210 V1 CLI Reference Guide - Page 51
lacp port-priority, show lacp interface, Command Mode, Example, Description, Syntax, Parameter
View all TP-Link TL-SG3210 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
Command Mode Interface Configuration Mode(interface ethernet / interface range ethernet) Example Configure the admin key of port 1 as 1024: TP-LINK(config)# interface ethernet 1 TP-LINK(config-if)# lacp admin-key 1024 lacp port-priority Description The lacp port-priority command is used to set the port priority for a port. To restore to the default priority, please use no lacp port-priority command. Syntax lacp port-priority value no lacp port-priority Parameter value -- System priority, ranging from 0 to 65535. By default, the value is 32768. Command Mode Interface Configuration Mode(interface ethernet / interface range ethernet) Example Set the system priority of port 1 to1024: TP-LINK(config)# interface ethernet 1 TP-LINK(config-if)# lacp port-priority 1024 show lacp interface Description The show lacp interface command is used to display the port configuration information of LACP. Syntax show lacp interface [ethernet port-num] 39