TP-Link TL-SG3210 TL-SG3210 V1 CLI Reference Guide - Page 81
dot1x retry, dot1x(interface
View all TP-Link TL-SG3210 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 81 highlights
Example Configure the Quiet Period and the SupplicantTimeout as 12 seconds and 6 seconds: TP-LINK(config)# dot1x timer quiet-period 12 supp-timeout 6 dot1x retry Description The dot1x retry command is used to configure the maximum transfer times of the repeated authentication request. To restore to the default value, please use no dot1x retry command. Syntax dot1x retry retry-time no dot1x retry Parameter retry-time --The maximum transfer times of the repeated authentication request, ranging from 1 to 9 in times. By default, the value is 3. Command Mode Global Configuration Mode Example Configure the maximum transfer times of the repeated authentication request as 5: TP-LINK(config)# dot1x retry 5 dot1x(interface) Description The dot1x command is used to enable the IEEE 802.1X function for a specified port. To disable the the IEEE 802.1X function for a specified port, please use no dot1x command. Syntax dot1x no dot1x 69