TP-Link TL-SG3210 TL-SG3210 V1 CLI Reference Guide - Page 43
gvrp registration, gvrp timer
View all TP-Link TL-SG3210 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
Example Enable the GVRP function for ports 2-6: TP-LINK(config)# interface range ethernet 2-6 TP-LINK(config-if)# gvrp gvrp registration Description The gvrp registration command is used to configure the GVRP registration type on the desired port. To restore to the default value, please use no gvrp registration command. Syntax gvrp registration { normal | fixed | forbidden } no gvrp registration Parameter normal | fixed | forbidden -- Registration mode. By default, the registration mode is nomal. Command Mode Interface Configuration Mode(interface ethernet / interface range ethernet) Example Configure the GVRP registration mode on the port 2-6 to fixed: TP-LINK(config)# interface range ethernet 2-6 TP-LINK(config-if)# gvrp registration fixed gvrp timer Description The gvrp timer command is used to set a GVRP timer for the desired port. To restore to the default setting of a GARP timer, please use no gvrp timer command. Syntax gvrp timer { leaveall | join | leave } {value} no gvrp timer [leaveall | join | leave] 31