TP-Link TL-SG3210 TL-SG3210 V1 CLI Reference Guide - Page 93
logging clear
View all TP-Link TL-SG3210 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 93 highlights
The logging local flash command is used to configure the level and the status of the log file input.To restore to the default configuration, please use no logging local flash command. The log file indicates the flash sector for saving system log. The inforamtion in the log file will not be lost after the switch is restarted and can be got by the show logging flash command. Syntax logging local flash {level} [ disable | enable ] no logging local flash Parameter level --Severity level of the log information output to each channel. There are 8 severity levels marked with values 0-7. The smaller value has the higher priority. Only the log with the same or smaller severity level value will be output. By default, it is 4 indicating that the log information marked with 0~4 will be saved in the log buffer. disable | enable --Disable or enable the log file. By default, it is enabled. Command Mode Global Configuration Mode Example Enable the log file function and set the severity as 7: TP-LINK(config)# logging local flash 7 logging clear Description The logging clear command is used to clear the information in the log buffer and log file. Syntax logging clear [ buffer | flash ] Parameter buffer | flash -The output channels: buffer and flash. Clear the information of the two channels, by default. Command Mode Global Configuration Mode 81