TP-Link TL-WA501G User Guide - Page 25
Con the TL-WA501G AP3 on LAN 3 in Point-to-Point Bridge mode with the MAC
UPC - 845973051129
View all TP-Link TL-WA501G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
TL-WA501G 54M Wireless Access Point User Guide Figure 3-10 Point to Multi-point Bridge 1. Configure the Operating Mode of the TL-WA501G Access Points. • Because it is in the central location, configure TL-WA501G (AP1) on LAN Segment 1 in Point-to-Multi-Point Bridge mode. The MAC addresses of AP2 and AP3 are required in AP1. • Configure TL-WA501G (AP2) on LAN Segment 2 in Point-to-Point Bridge mode with the MAC Address of AP1. • Configure the TL-WA501G (AP3) on LAN 3 in Point-to-Point Bridge mode with the MAC Address of AP1. 2. Verify the following parameters for all access points. • All TL-WA501G Access Points use the same Channel, and security settings if any. • All Point-to-Point APs must have AP1's MAC address in its AP MAC address field, and AP1 must have all All Point-to-Point APs' MAC addresses. 3. Verify connectivity across the LANs. • A computer on any LAN segment should be able to connect to the Internet or share files and printers with any other PCs or servers connected to any of the three LAN segments. • Wireless stations will not be able to connect to the TL-WA501G Access Points in the illustration above. If you require wireless stations to access any LAN segment, you can add TL-WA501G Access Points configured in Wireless Access Point mode to any LAN segment. 18