Thermador PRD486JDGU Installation Manual - Page 10
Step 3: Unpacking and Moving, the Range
View all Thermador PRD486JDGU manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
Electrical Supply Installation of the range must be planned so that the roughin of the terminal block for the receptacle or conduit connection will allow maximum clearance to the rear of the unit. When the power supply cord or conduit is connected to the mating receptacle or terminal block cover, the combined connection should protrude no more than 2"(51mm) from the rear wall (see Figure 4). Refer to Figure 11 on page 16 for location of the terminal block on unit. To minimize binding when the unit is connected, orient the receptacle or conduit connector, and slide back into position. 2" (51mm) maximum Step 3: Unpacking and Moving the Range CAUTION: The unit is heavy and should be handled accordingly. Proper safety equipment such as gloves and adequate manpower of at least two people must be used in moving the range to avoid injury and to avoid damage to the unit or the floor. Rings, watches, and any other loose items that may damage the unit or otherwise might become entangled with the unit should be removed. Hidden surfaces may have sharp edges. Use caution when reaching behind or under appliance. The range has an approximate shipping weight as shown in "Chart A". The grates, griddle plate, burner caps, and oven racks must be removed to facilitate handling. Do not remove the griddle element and tray assembly. 2" (51mm) maximum when plugged in 1. Remove the outer carton and packing materials from the shipping pallet but leave the adhesive-backed foam layer over brushed-metal surfaces, to protect finish from scratches, until the range is installed in its final position. 2. Remove the door(s) (see "Step 4: Door Removal and Reinstallation" on page 10); however, do not remove the warming drawer or steam oven doors. This will create an estimated reduction in the weight as shown in "Chart A" and allow the range to pass through 30" (762mm) doorways (see clearances shown on page 6). Figure 4: Wall Connection Chart A Shipping Weight Weight without packing materials Without door(s), burner caps, and oven racks 36" Range 420 lbs (191 kg) 360 lbs (163 kg) 260 lbs (118 kg) 48" Range 590 lbs (268 kg) 530 lbs (240 kg) 390 lbs (177 kg) Caution DO NOT lift the range by the oven door's handle, as this may damage the door hinges and cause the door to fit incorrectly. English 8
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
-
67
-
68
-
69
-
70
-
71
-
72
-
73
-
74
-
75
-
76
-
77
-
78
-
79
-
80
-
81
-
82
-
83
-
84
-
85
-
86
-
87
-
88
-
89
-
90
-
91
-
92
-
93
-
94
-
95
-
96
-
97