Thermador SGSX365TS Instruction manual - Page 13
Control Knobs
View all Thermador SGSX365TS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
36" SGSXP ExtraLow® (XLO) Knobs SGSX and SGSXP models have standard metal burner controls and rubber grommets as well as two ExtraLow® burner controls on the left front and center. ~ "Thermador ExtraLow® (XLO) STAR™ Burners (SGSX and SGSXP models only)" on page 12 The ExtraLow® burner controls have five XLO settings that vary in heating level. A slight catch will be felt when at the LO position and each designated XLO setting. 9 WARNING To prevent flare-ups, properly support pots and avoid spills, all grates must be properly positioned on the cooktop whenever the cooktop is in use. Each of the four feet must be placed into the corresponding dimples in the cooktop. Do not use a grate if the rubber feet are missing or damaged. For replacement of rubber feet: Call Customer Support at 1-800-735-4328. Control Knobs The cooktop has one control knob for each burner. Push down and turn to the left to light and set the desired heat setting. 9 WARNING Failure to operate knobs properly may result in personal injury and damage to the appliance. Standard Knobs SGS and SGSP models, which do not feature ExtraLow® operation, have only standard metal burner controls and rubber grommets. To operate: Select the appropriate control knob and push down. A clicking noise will occur immediately after pushing the knob. Turn knob counterclockwise to the HI setting to ignite the flame. Continue turning knob counterclockwise to desired flame size. Turn off by turning the control knob clockwise to OFF. To operate: Select the appropriate control knob, push down and turn counterclockwise until the control knob is set within one of the five XLO settings. Turn off by turning the control knob clockwise to OFF. Control Knob Removal To remove knob and/or grommet: With control knob in the OFF position, gently lift knob up and off. Gently pull the grommet from the sides and lift out. 9 WARNING To avoid possible electric shock, do not reach through control opening into rough-in box. 9 WARNING Do not use the appliance without the knobs and grommets in place. To replace knob and/or grommet: Carefully insert the grommet into the opening, ensuring that the maintop is seated in the track around the entire perimeter of the grommet. Replace control knob by placing indicator line at the OFF position. Press down firmly. 13