Thermador T36BB110SS View Kitchen Design and Planning Guide - Page 98

| THERMADOR | FREEDOM® REFRIGERATION | THERMADOR | FREEDOM® REFRIGERATION INSTALLATION OPTIONS Freedom® Collection The Freedom® Collection offers a variety of installation possibilities*. In some instances, special accessories are required. Recommended Installations StandAlone Considerations Any Freedom appliance can be installed as a stand-alone unit. Ensure a cutout flush to the appliance at a depth of minimum 4" (102 mm), preferably 6" (152 mm) on the top and sides. Side-By-Side Split Columns with Partition When two appliances are installed side-by-side a sealing kit must be used. For combinations that involve a freezer column, this kit is provided. For all other (non-traditional) side-by-side combinations or instances where any appliances are installed less than 6" (152 mm) apart from one another but not connected side-by-side, purchase the Heater Kit (HEATRKIT20). When dimensioning the partition, note the thickness of the door panel (including handles) as well as the swivel range to prevent damage if the doors are opened at the same time. (See page 201 for details on door swivel range dimensions) Three appliances can be installed together only if a partition - minimum 5/8" (16 mm) - is placed between two of the appliances. Ensure that door panel thickness (including handles) as well as the swivel range are accounted for. At The End of a Cabinetry Run Recommended Installations 192 *The Thermador warranty shall apply only to recommended installations. All Freedom appliances must be completely enclosed on the top and sides. If one side of the appliance is visible, a decorative side panel must be used. The side panel must be connected firmly to the wall, the floor and any overhead furniture / fixtures before the appliance is placed in the cutout. Concerns It is absolutely essential to ensure that the appliance is installed in such a way that the doors do not interfere with an adjacent wall or other kitchen elements. (See page 201 for details on door swivel range dimensions) A partition - minimum 5/8" (16 mm) - is required to ensure the doors do not interfere with one another when opened. Use a partition to separate appliances and observe the door swivel range. (See page 201 for details on door swivel range dimensions) A Thermador French Door Bottom Freezer cannot be connected side-by-side with any other appliance. Use a partition to separate appliances and observe the door swivel range. (See page 201 for details on door swivel range dimensions) DOOR PANEL DIMENSIONS Freedom® Collection Each Freedom® Collection refrigeration appliance is designed to be equipped with a decorative door panel. A panel can be custom-made or purchased as a stainless steel accessory. The table below illustrates the dimensions of the stainless steel panel accessories and can be used as a guide in creating custom panels. At 79 7/8" (2029 mm) tall, they are designed for a toekick height of 4" (102 mm), and a total cutout height of 84" (2134 mm) yielding 1/8" (3 mm) reveals. At 3/4" (19 mm) deep, they are designed to attach to the 24" (610 mm) deep appliance for an overall depth of 24 3/4" (629 mm). See page 194 for cutout planning. When using custom panels, always ensure that the panel reverse is finished to match the exterior, as parts of the panel reverse will be visible when the refrigerator door is opened. IMPORTANT: While these sketches can serve as a general guide in planning panel dimensions, the correct panel dimensions are dictated by design choices including style and dimensions of surrounding kitchen cabinetry, case and toekick height, etc. Please ensure careful planning based on the specific kitchen design. Single Door W Dispenser W P M Bottom Freezer W V R Wine Preservation W U S H H NH H 4" (102mm) Q Note #1 F Drawer or Door L Note #2 DESCRIPTION H W V R F M N MAX. PANEL P Q U L S WEIGHT 18-Inch Freezer Column 79 7/8" 17 3/4" (2029 mm) (451 mm) - - - - - - - - - - 120 lbs. (54kg) 23.5-Inch Fresh Food Column 79 7/8" 23 17/64" (2029 mm) (591 mm) - - - - - - - - - - 80 lbs. (36kg) 24-Inch Freezer / 79 7/8" 23 3/4" Fresh Food Columns 2029 mm) (603 mm) - - - - - - - - - - 80 lbs. (36kg) 30-Inch Freezer / 79 7/8" 29 3/4" Fresh Food Columns (2029 mm) (756 mm) - - - - - - - - - - 50 lbs. (23kg) 36-Inch Freezer / 79 7/8" 35 3/4" Fresh Food Columns (2029 mm) (908 mm) - - - - - - - - - - 80 lbs. (36kg) 18-Inch Ice & Water Dispenser Columns 79 7/8" 17 3/4" (2029 mm) (451 mm) - - - 9 1/16" 14 1/2" 32 11/16" 4 11/32" (230.5 mm) (368.3 mm) (830.5 mm) (110 mm) - - - 150 lbs. (68kg) 24-Inch Ice & Water Dispenser Columns 79 7/8" 23 3/4" (2029 mm) (603 mm) - - - 9 1/16" 14 1/2" 32 11/16" 7 11/32" (230.5 mm) (368.3 mm) (830.5 mm) (186 mm) - - - 150 lbs. (68kg) 30-Inch Two-Door Bottom Freezer 79 7/8" 29 3/4" (2029 mm) (756 mm) - 51 11/32" 28 13/32" (1304 mm) (722 mm) - - - - - - - Door: 90 lbs. (41kg) Drawer: 20 lbs. (9kg) 36-Inch Two-Door Bottom Freezer 79 7/8" 35 3/4" (2029 mm) (908 mm) - 51 11/32" 28 13/32" (1304 mm) (722 mm) - - - - - - - Door: 55 lbs. (25kg) Drawer: 22 lbs. (10kg) 36-Inch French Door 79 7/8" 35 3/4" 17 3/4" 51 11/32" 28 13/32" Bottom Freezer (2029 mm) (908 mm) (451 mm) (1304 mm) (722 mm) - - - - - - - Door: 140 lbs. (63kg) Drawer: 22 lbs. (10kg) 18-Inch Wine 79 7/8" 17 3/4" Preservation Column (2029 mm) (451 mm) - - - - - - - 10 1/8" 10 1/8" 3 3/4" (257 mm) (257 mm) (95 mm) 150 lbs. (68kg) 24-Inch Wine 79 7/8" 23 3/4" Preservation Column (2029 mm) (603 mm) - - - - - - - 10 1/8" 10 1/8" 3 3/4" (257 mm) (257 mm) (95 mm) 150 lbs. (68kg) NOTE #1: The cutout for the dispenser unit must be horizontally and vertically centered in the panel. NOTE #2: For custom wine preservation column door panels, the width of the two lateral flanges of the frame may vary between 2 1/2" (64 mm) and 3 3/4" (95 mm). 193