Toshiba 42HL196 Operation Guide - Page 52

Chapter 5: Using the TV's features Displaying TV status information using RECALL To display TV status information on-screen: Press E on the remote control. The following information will display on-screen (if applicable): • Current input (ANT 1, ANT 2, VIDEO 1, etc.) • If ANT 1 or ANT 2 is the current input, either "CABLE" (for cable TV) or "TV" (for over-the-air broadcasts). • Channel number (if in ANT 1 or ANT 2 mode) • Digital signal strength indicator (bar graph in lower right corner of screen; for ATSC signal only) Note: The signal strength indicator will react to fading and increasing signals. • Time (if set) • On timer setting (if set) • Remaining time on game timer (if set) • Remaining time on sleep timer (if set) • Stereo or SAP audio status • V-Chip rating status • Picture size • Video resolution STEREO NC-17 Sleep Timer: 18 min. Natural 480i ANT 1 CABLE 81-1 Sample RECALL screen To close the RECALL screen: Press E again. Understanding the auto power off feature The TV will automatically turn itself off after approximately 15 minutes if it is tuned to a vacant channel or a station that completes its broadcast for the day. This feature functions in ANT 1 and ANT 2 modes only. Understanding the last mode memory feature If the power is cut off while you are viewing the TV, the Last Mode Memory feature automatically turns on the TV when the power is resupplied. Note: You should unplug the TV's power cord if it is possible that you will be away from the TV for an extended period of time after the power is restored. This will prevent the TV from being automatically turned on in your absence. 52