Toshiba 55L6200U User Guide - Page 33
To connect the IR blaster cable, Sample Illustration L6200U/L7200U Series-Using the IR blaster
View all Toshiba 55L6200U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
Connecting Your TV 33 Connecting remote IR devices ❖ Dual-wand IR blaster cable (see "Dual-wand IR blaster cable" on page 29) ❖ Other cables as required to connect the device(s) to the TV (see "Overview of cable types" on page 27) See the remote IR blaster setup section. To connect the IR blaster cable: 1 Locate the infrared sensor on the front of your device. This sensor is marked on some devices.If you are having issues locating the device's infrared sensor, see "If you cannot locate the device's infrared sensor:" on page 34. 2 Align one of the IR blaster cable's wands approximately 1 inch away from the infrared sensor on the front of the device and attach it using double-sided mounting tape. If you have a second device, attach the second wand in a similar manner. NOTE If you do not have a second device, coil the second wand with a rubber band and leave it behind the TV. 3 Plug the IR blaster cable's plug into the TV's IR Blaster Out terminal. Front of IR-controlled DVD player (for example) Front of IR-controlled audio device (for example) Infrared sensor IR blaster cable wand (approx.1 inch from device) TV back panel Dualwand IR blaster cable (Sample Illustration) L6200U/L7200U Series-Using the IR blaster OUT terminal