Toshiba BDX2150KU Owners Manual - Page 11
Connections - internet
View all Toshiba BDX2150KU manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
Connections Connecting to a digital amplifier/AV receiver Route the sound from this player to other device to enhance audio output. • Connect a coaxial cable from the COAXIAL DIGITAL jack on this product to the COAXIAL jack on the device. • If your AV receiver or amplifier has an HDMI jack, you can also connect the HDMI cable to HDMI IN jack on your AV receiver or amplifier. AV receiver / amplifier DIGITAL AUDIO INPUT COAXIAL digital audio coaxial cable (not included) Connecting to network Your Blu-ray Disc™ player can be connected to your home network: • By connecting an Ethernet cable to the ETHERNET jack on the rear of your player and to a wired hub or router. Using a wired network provides the best performance, because the attached devices connect directly to the network and are not subject to radio frequency interference. Connecting your player to a wired router • Connect an Ethernet cable (CAT5 or better with RJ45 connector) to the ETHERNET jack on the back of your player and to an Ethernet jack on a hub or broadband router. Networking equipment (modem, etc.) LAN Internet LAN cable LAN WAN Hub or broadband router LAN 5 4 3 2 1 LAN cable Notes: • Do not connect a modular phone cable to the ETHERNET jack. • When plugging or unplugging the cable, hold the connector on the end of the cable. When unplugging, do not pull on the cable. Press down the lock tab and pull the connector out of the jack. • Because there are various connection configurations, follow the instructions from your telecommunication carrier or Internet service provider. 11