Toshiba SD5970 Owners Manual - Page 55

Audio Rating •.Digital .0ut (Yi0DCTS-2 Selected the output sound format corresponding to your system connection. 1) Press 1 / 0- to select Audio. 2) Press ENTER. 3) Press ENTER button, then press A / • to shift and change the output sound format. PCM: Select when connected to a 2 channel digital stereo amplifier. The DVD video player outputs sounds in the PCM 2 channel format when you play a DVD video disc recorded on the Dolby Digital, MPEG1 OR MPEG2 recording system. Raw: Does not have a Dolby Digital Decode. Notes • When you make a connection to a TV, or Dolby Surround Pro Logic or stereo system via the analog audio jacks, select "PCM" or "Raw". • If apply HDMI connection to TV, make sure to select "PCM", audio signal passing to TV via HDMI cable. Password./ Rating DVD discs equipped with the password function are rated according to their content. The contents allowed by a parental lock level and the way a DVD disc can be controlled may vary from disc to disc. For example, if the disc allowed, you could edit out 0 violent scenes unsuitable for children and replace them with more suitable scenes, or you could lock co out playback of the disc altogether. 0 • DVD video discs may or may not respond to the parental lock settings. This is not a defect in the DVD video player. Make sure this function works with your DVD video discs. 1) Press Al / IP- to select the Rating. 2) Press ENTER. 3) Press A / • to select Rating and then press ENTER repeatedly to set the parental lock level. 4) Press A to the Password and enter your 4digits security code, then press ENTER button. 5) Press RETURN. L_ Notes • If you make a mistake before pressing ENTER button, press CLEAR button and enter your 4-digit security code again. • You cannot play DVD discs rated higher than the level you selected unless you cancel the parental lock function. (continued) 55