Toshiba TLP-250 Owners Manual - Page 50
FULL MENU settings - Default setting
View all Toshiba TLP-250 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
FULL MENU settings - Default setting CONTENTS 50 You can set the Input source, projection mode, etc. from FULL MENU [Default setting]. To operate FULL MENU, refer to page 43 . Input source setting : On/Off with ENTER : On/Off with ( ) or ( ) COMPUTER Analog RGB Y/PB/PR VIDEO S-VIDEO CAMERA SET : COMPUTER connector is selectable with the INPUT button. SET : Use COMPUTER connector as Analog RGB input. SET : Use COMPUTER connector as Y/PB/PR input. SET : Video input is selectable with the INPUT button. SET : S-Video input is selectable with the INPUT button. SET : Camera input is selectable with the INPUT button. Projection mode Standard Rear Ceiling Rear ceiling SET The projector is set to the floor-mounted front projection mode. SET The projector is set to the floor-mounted rear projection mode. SET The projector is set to the ceiling-mounted front projection mode. SET The projector is set to the ceiling-mounted rear projection mode. Background Logo Blue None SET The TOSHIBA logo is displayed when no signal is input. SET The entire screen is set to blue when no signal is input. SET Nothing is displayed when no signal is input. No signal power off Off 5 min. SET The power does not turn off automatically even if no signal status continues. SET The power turns off automatically when no signal status continues for approx. 5 min. Power on Manual Auto. SET The power turns on by pressing the ON/STANDBY button. SET When the power plug is inserted, the power is on. Start-up screen On Off SET The start-up display appears when the power is turned on. SET The start-up display does not appear when the power is turned on. Reset EXEC. Return the settings of FULL MENU [Default setting] to the factory default values. The relationship between input source and item Yes: Adjustable -: Not displayed Analog RGB Y/PB/PR Video S-Video Camera Yes (common for all of the inputs) Yes (common for all of the inputs) Yes (common for all of the inputs) Yes (common for all of the inputs) Yes (common for all of the inputs) Yes (common for all of the inputs) Yes (common for all of the inputs) Adjustments & Settings Notes • It is impossible to exit from the menu if no input source is selected. • If the check in the check box for the currently selected source is removed, the setting becomes effective the next time the input is changed. • In the following conditions, the function to detect no signal ("No signal background", "No signal power off") does not activate: 1) When "Video mode" 45 is set to the modes other than [Auto] and Video input or S-Video input is selected. 2) When "Signal format" 45 is set to the modes other than [Auto] and Y/PB/PR input is selected. • Note that the projector automatically powers up at the restoration of power after a failure, if "Power on" is set to [Auto] with the power plug inserted. • Even if "Power on" is set to [Auto], the setting of [5 min.] of "No signal power off" is effective. • Each item can be set at all input sources, but the settings made at one input source are applied in common to all input sources. • The settings made are memorized automatically when the power is turned off by pressing the ON/STANDBY button. If the power cord is un-plugged or if a power failure occurs while the projector is on, the settings are not memorized.