Toshiba TLP-250 Owners Manual - Page 65

Lamp replacement continued

Get Toshiba TLP-250 PDF manuals and user guides View all Toshiba TLP-250 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 65 highlights

Lamp replacement (continued) CONTENTS 65 Notes • When the CALL button is pressed, the "Lamp time" (the approximate amount of time the lamp has been used) will be displayed. 39 • The lamp should be replaced if the total working time exceeds about 1,500 hours. When the "Lamp time" is displayed as 1500 hours, the icon and a message appear. They will disappear when you do some operation. • Attach the lamp cover firmly after replacing the lamp. If it is not set correctly, the power will not turn on. • Use a new lamp when replacing it. • The lamp is made of glass and is very fragile. Do not touch the lamp with your bare hands and do not jolt or damage it. Do not try to use an exhausted lamp. A small amount of inorganic mercury harmful to environment is used for the lamp. Dispose of the exhausted lamp according to the rules of your area. 5 Load a new lamp. Slide until it hits the bottom and tighten the two fixing screws. 6 3 Attach the lamp cover. Slide the cover into place and tighten the two screws. 21 Maintenance 7 Reset the lamp timer. Refer to the lamp instructions for resetting.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
65
Maintenance
CONTENTS
Notes
•
When the
CALL
button is pressed, the
“
Lamp
time
”
(the approximate amount of time the lamp
has been used) will be displayed.
39
•
The lamp should be replaced if the total working
time exceeds about 1,500 hours.
When the
“
Lamp time
”
is displayed as 1500 hours,
the icon
and a message appear. They will
disappear when you do some operation.
•
Attach the lamp cover firmly after replacing the
lamp. If it is not set correctly, the power will not
turn on.
•
Use a new lamp when replacing it.
•
The lamp is made of glass and is very fragile. Do
not touch the lamp with your bare hands and do
not jolt or damage it. Do not try to use an
exhausted lamp.
A small amount of inorganic mercury harmful to
environment is used for the lamp. Dispose of the
exhausted lamp according to the rules of your
area.
Lamp replacement (continued)
5
Load a new lamp.
Slide until it hits the bottom and tighten the two fixing screws.
6
Attach the lamp cover.
Slide the cover into place and tighten the two
screws.
Reset the lamp timer.
Refer to the lamp instructions for resetting.
7
2
1
3