Toshiba Tecra M2-S410 Maintenance Manual - Page 121
Executing the Diagnostic Test, Tests and Diagnostics, Restarts the test from the error.
View all Toshiba Tecra M2-S410 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 121 highlights
3.2 Executing the Diagnostic Test 3 Tests and Diagnostics 5. The following message will appear: ERROR STOP : YES/NO Then, use the left or right arrow keys to move the cursor to the desired option and press Enter. Selecting YES stops the test program when an error is found and displays the operation guide on the right side of the display screen as shown below: ERROR STATUS NAME [[ HALT OPERATION ]] 1: Test end 2: Continue 3: Retry These three selections have the following functions respectively: 1. Terminates the test program and exits to the subtest menu. 2. Continues the test. 3. Restarts the test from the error. Selecting NO keeps the test running even if an error is found. 6. Use the arrow keys to move the cursor to the desired option and press Enter. Table 3-1 in section 3.3 describes the function of each test on the subtest menu. Table 3-5 in section 3.22 describes the error codes and error status for each error. TECRA M2 Maintenance Manual (960-468) 3-7