Toshiba Tecra M2-S410 Maintenance Manual - Page 201
Alarm Date Option, Alarm Time, Setup by OS, All Devices, Device Config. = All Devices
View all Toshiba Tecra M2-S410 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 201 highlights
3.29 SETUP 3 Tests and Diagnostics (d) Auto Power On Use this option to set a time and date for automatic power on and enable or disable the ring indicator feature. Alarm Date Option appears only when Alarm Time is enabled. OPTIONS Alarm Time Alarm Date Option Wake-up on LAN = 00:00:00 = Disabled = Disabled* *Only for LAN Model Alarm Time is set in the sequence of hours and minutes. Seconds cannot be changed. Alarm Date Option is set in the sequence of month and day. If Alarm Date is set to Disabled, the computer will be powered on at the same time every day. Press ↓ to move the cursor to the right and ↑ to move the cursor to the left when you set the date and time. NOTE: Do not remove the AC adaptor and battery pack at the same time when you use this feature. If you do so, data saved by the resume function will be lost. You must also reset this option. 9. Configuration This option displays the configuration method. (a) Device Config. The devices are initialized when the PNP OS loads. Setup by OS First, devices necessary for loading the OS will be initialized. After the PNP OS loads, the OS will initialize other devices. In this case, setup of PC Cards will be fixed to "Auto-Selected," and cannot be changed. (Default) All Devices All devices will be initialized. If you are using an OS that does not have PNP capacity, select "All Devices." The Display shows the following message: Device Config. = All Devices TECRA M2 Maintenance Manual (960-468) 3-87