Toshiba Tecra M2-S410 Maintenance Manual - Page 256

4 Replacement Procedures 4.14 Bluetooth module 4.14 Bluetooth module Removing the Bluetooth module To remove the Bluetooth module, follow the steps below and refer to figure 4-26. CAUTION: Do not try to remove the Bluetooth module with the computer turned on. You can damage the computer or Bluetooth module. Do not touch the connectors on the Bluetooth module on the computer. Debris on the connectors may cause Bluetooth access problems. 1. Remove the Bluetooth cable (brown) from the Bluetooth module using an antenna coaxial cable disconnector. 2. Remove the following screw securing the Bluetooth module. • M2×3S S-FLAT HEAD screw ×1 3. Lift up the Bluetooth module carefully from the connector PJ4400 on the sound board. M2×3S S-FLAT HEAD Bluetooth module Bluetooth cable Figure4-26 Removing the Bluetooth module 4-42 TECRA M2 Maintenance Manual (960-468)