Toshiba Tecra M2-S410 Maintenance Manual - Page 169
BD_ADDR of the DUT, Bluetooth Test, Tests and Diagnostics, Table 3-2
View all Toshiba Tecra M2-S410 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 169 highlights
3.21 Bluetooth Test 3 Tests and Diagnostics Table 3-2 Error code for Bluetooth test (BD_ADDR) (2/2) Error code Meaning 0x20 0x21 0x22 0x23 0x24 0x25 0x26 0x27 0x28 0x29 0x2a 0x2b 0x2c 0x2d 0x2e 0x2f Unsupported LMP Parameter Value. Role Change Not Allowed. LMP Response Timeout. LMP Error Transaction Collosion. LMP PDU Not Allowed. Not Exist Not Exist Not Exist Not Exist Not Exist Not Exist Not Exist Not Exist Not Exist Not Exist Not Exist ** Not Exist means that there is no massage at the code. ** See the Specification of the Bluetooth System in detail. Subtest 03 Communication test (DUT mode) This subtest checks the Bluetooth communication functions. Preparing the tester machine for the Bluetooth test program. Insert a floppy disk containing the test program into the tester machine and turn on the tester machine. The Bluetooth test menu will appear: Press 3 to select the test and press Enter in the target machine. The following message will appear: When the test begins, the machine displays BD_ADDR of the DUT. The progress bar stops when the test is completed. The following message is displayed. Bluetooth Subsystem T&D for PCSE(CS-Air) VerX.XX Copyright (C) by TOSHIBA Co. | DUT | BD_ADDR of the DUT = XXXXXXXXXXXXX [h] Ready