Toshiba Tecra M2-S410 Maintenance Manual - Page 136
Floppy Disk Test, To execute the Floppy Disk Test, select
View all Toshiba Tecra M2-S410 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 136 highlights
3 Tests and Diagnostics 3.8 Floppy Disk Test 3.8 Floppy Disk Test NOTE: Before running the floppy disk test, prepare a formatted work disk. Remove the Diagnostics Disk and insert the work disk into the FDD. Otherwise, the contents of the floppy disk will be erased. To execute the Floppy Disk Test, select 5 from the DIAGNOSTIC TEST MENU, press Enter. 1. The following messages will appear. Specify the start track of the floppy disk drive to be tested. Test start track (Enter:0/dd:00-79)? 2. The Floppy Disk test contains five subtests that test the FDD. The floppy disk test menu will appear after you select FDD test parameters. SUB-TEST MENU: 01-Sequential read 02-Sequential read/write 03-Random address/data 04-Write specified address 05-Read specified address 99-Exit to DIAGNOSTIC TEST MENU 3. When the subtest 04 or 05 is selected, the following messages will appear on the screen. Select the test data (subtest 04 only), track number and head number you want to test. Test data Track No. Head No. ?? (subtest 04 only) ?? ? Select the number of the subtest you want to execute and press Enter. The following message will appear during the floppy disk test. FLOPPY DISK XXXXXXX XXX DIAGNOSTIC TEST VX.XX [Ctrl]+[Break] : test end [Ctrl]+[C] : key stop SUB-TEST : XX PASS COUNT : XXXXX ERROR COUNT : XXXXX WRITE DATA : XX READ DATA : XX ADDRESS : XXXXXX STATUS : XXX 3-22 TECRA M2 Maintenance Manual (960-468)